#Fldigi signalink setup software

Fldigi C-media setup instructions: The вЂnewвЂ™ way to set up Fldigi and a DRA.VARA FM AND WINLINK SETUP GUIDE A very comprehensive guide to setting up your DRA-36.You will need to purchase a 6 pin mini DIN male to male cable to connect to your radio. The instructions are not quite up to Heathkit standards but easy enough to follow. The surface mount sound-chip comes presoldered to the board. The kit does require good soldering skills, a very fine point iron, small diameter (0.5 or 0.6 mm) solder and a good magnifying headset in order to work with the small lands on the board. The DRA-36 is available as a kit or preassembled.

The DRA is designed for use with WinlinkвЂ™s VARA FM with the latest high speed version of the software. The radio side is a 6 pin mini DIN wired to be compatible with current 6 pin mini DIN radio ports. Like the Signalink, the DRA-36 comes with a built in very high quality sound-card (C-Media CM119A) and attaches to your computer via a USB port.

#Fldigi signalink setup software

with the right software to manage the PTT, more on this below. The DRA also works in the HF bands with Fldigi etc. The DRA will work just fine at 1200 baud for older radios without 9600 baud capability but you will not benefit from the highest possible throughput. This Digital Radio Adapter (DRA) is designed to operate at 9600 baud on the VHF and UHF bands thus requiring a radio capable of that speed in order to fully realize the increased throughput. The Masters Communications DRA-36 ( ) is a high speed broad bandwidth substitute for a Signalink or home-brew sound-card interface. DRA units can now accept direct PTT from Fldigi and UZ7HO